11/28/2023 0 Comments Transmission fluid checkIf the transmission fluid level is a very dark color or black and smells burned, it could indicate a transmission problem. If the transmission fluid is in good condition, it should be red or slightly brown. Pay attention to the color of the transmission fluid color. For this procedure, you will need a GM Transmission OBD-II Scanner. If necessary, carry out Transmission Service Adaptation (Fast Learn) Procedure. Once the transmission fluid level has been corrected, reinstall the set plug and cover and lower the vehicle.The level is correct when the oil drips out of the set plug hole. If there is no transmission fluid coming out of the set plug hole, you must add transmission fluid.If no transmission fluid comes out of the set plug, the transmission fluid level is too low. If you notice a lot of transmission fluid flowing out, the transmission is overfilled. The transmission fluid level is normal if you notice very little fluid coming out. Remove the transmission fluid set plug on the side of the transmission.Remove the plastic panel under the transmission.If you check the transmission fluid level at home, you must jack up the vehicle at all four jack points and secure each corner with jack stands. The engine needs to stay running in Park and must be level. Once you have cycled the transmission through PRND, place the transmission in Park. Press the brake pedal and move the shifter between Park, Reverse, Neutral, and Drive, keeping the transmission in each gear for at least 5 seconds.Keep the engine running and let it idle.The transmission fluid temperature should be checked with a GM Transmission OBD-II Scanner. Driving for 10 to 15 minutes will put the transmission fluid temperature in the required range. The transmission fluid level must be checked when the transmission fluid temperature (TFT) is 85– 95☌ (185–203☏). Drive the vehicle for 10 min to allow the transmission fluid to warm up.How to check transmission fluid level on GM 9-speed automatic transmission If there is no transmission fluid in the transmission pan, checking the transmission fluid level using these steps can damage the transmission. The following procedure should only be carried out if you know that at least some transmission fluid is present. Also known as 9T45, 9T50, 9T60, and the 9T65 transmissions. In this guide, you will find instructions on how to check the transmission fluid level on the nine-speed GM automatic transmission used on many 2018 and newer Buick, Cadillac, Chevrolet, and GMC vehicles.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |